A Guide on How to Change a Toilet Flush System in Singapore

Changing a toilet flush system can enhance the functionality of your bathroom and save water. Understanding the procedure is important, whether it is due to malfunction or a desire for efficiency. This guide discusses everything you need to know about cheap toilet flush system replacement in Singapore.

Why Should You Replace Your Flush System?

Many reasons would necessitate changing your toilet flushing system. Over time, some parts might deteriorate, causing inefficiencies. Leakage and weak flushing power are some common problems with them. Also, upgrading to newer ones could be helpful in conserving water and reducing utility costs, as well as being less noisy and reliable.

Choosing the Right Type of Flush System

It is crucial to choose an appropriate type of flush system. There are mainly two types: gravity flush systems and pressure-assisted flush systems. Gravity flush systems are common and depend on gravity force to clear the bowl. Pressure-assisted units utilize compressed air to boost their flushing power. When selecting a unit, consider its design features together with your water-saving objectives.

Gathering Materials and Tools

Before you start working, collect all necessary tools and materials that are required to make work easier for you during the installation process. For example, a wrench, screwdriver, or even a hacksaw may be needed. Also, one should have a replacement flush valve, a new flapper, and possibly a new handle. Having all the tools and materials ready will help facilitate better replacement done by yourself without many complications.

Shutting off Water Supply

While commencing this process, turn off the water supply serving the toilet. Find where there’s always a stopcock, generally located near the base of your WC. Then, rotate it clockwise, thus stopping the flow. Flush the WC so that the tank gets drained. The sponge or towel may eliminate remnants from such a tank.

Removing Old Flush System

Afterward, remove the old flushing mechanism. Disconnect the lift chain from the handle. Pipe nuts tightly hold the flush valve and flapper. Remove the old parts cautiously, taking them out gently to avoid damaging the tank. Ensure that you clear any refuse or buildup from this area.

Fixing in the Replacement System

It is now time to install the new flushing system. Start with a flush valve. Position it into the hole at the bottom of the tank and apply the nuts provided. The next step is attaching a new flapper by ensuring that it seals correctly at the top of the flush valve. Put back the lift chain over the handle. During flushing, ensure that the flapper opens fully.

Testing New System

Now we are good to go. Check if your new flush system works appropriately, thus when you have installed it after putting water again. Turn on the water supply and wait for the tank to refill. Check if there are any leaks when filled. If not, leakages are seen, test whether it can be flushed using the handle. Avoid improperly closing of flap. Make necessary adjustments on the chain together with the flapper.

Maintenance Tips

Carry out regular maintenance from https://www.pshomemaintenance.com/ to lengthen the life span of your newly acquired flush system. Periodically check for leakage and replace worn-out parts where necessary. It is also essential never to employ highly concentrated chemicals in your toilet cistern since they could destroy some components. Additionally, use dual-flush converters, which save water further, like water-saving devices.

Cost Considerations

The cost of replacing a toilet flush system varies. Basic ones are inexpensive, but advanced models can be costly. If you need more confidence in doing it yourself, add the price for professional installation. Getting several quotes can help you determine a reasonable price. Remember that buying a high-quality product is an investment that will cut down on future costs.